国产自在自线午夜精品-国产综合精品-国产综合精品久久久久成人影-国产综合精品久久亚洲-国产综合精品一区二区三区-国产综合久久久久

Dongguan Weize Hardware Co., Ltd

Elaborate production, sincere serviceFocus on the development and production of carbide rotary files 18922987188/0769-27221035

Problem

More

Problem

聯系我們

Mr. Lin: 18922987188

Landline: 0769-27221035

Fax: 0769-28055429

Email: sales1@wizzardtools.com

Address: Building 1, Wansheng Science and 

Technology Park, No. 15, Qinghua Road, Nancheng 

Street, Dongguan City, Guangdong Province

Wizzard Brand Carbide Rotary File Operation Precautions

Time: 2021-12-30 17:05:07  View: 1097

Precautions for operation of wizard brand cemented carbide rotary file:

◆ replace the blunt rotary file in time. The cutting efficiency of the blunt rotary file is very low, so the pressure of the mill has to be increased to improve the speed. In this way, it is bound to cause damage to the rotary file and the mill at the same time, and the loss of consumption is far greater than the cost of replacing the rotary file.

◆ please choose the highest speed as far as possible in the range of cutting speed and speed we recommend, and avoid the speed lower than 3000 rpm; Low speed will reduce chip removal performance and produce tremor, resulting in reduced service life of rotary file and poor finish of machined surface;

◆ please choose larger head diameter and handle diameter as needed to improve efficiency;

◆ please select a suitable mill with stable performance, and often check whether the collet is excessively worn;

◆ rotate the grinder idly before use to check the state of the mill and the concentricity of the rotary file. Eccentricity and vibration will cause premature wear of the rotary file and damage to the workpiece;

◆ check whether the rotary file is tightly clamped with the grinding chuck before use, otherwise the handle of the rotary file may slip during use. In addition to affecting the grinding effect, the handle slip will also cause the knife handle to be impacted by continuous transverse shear force, and the local temperature will rise sharply, which may cause the handle to be injured or even broken;

◆ please avoid clamping the rotary file too shallow. Generally, the depth of the clamping handle should be at least 2 / 3 of the handle length, and the exposure of the handle rod should be at most 10mm (except for the extended handle), so as to ensure the safety of use;

◆ when using the rotary file with extended handle, the rotating speed should be properly reduced. For safety, the mill should be started after the rotary file extends into and contacts the workpiece. When the mill is started, please keep the rotary file in contact with the workpiece until the mill is closed;

◆ please move the processing from right to left during use to avoid horizontal reciprocating during processing, otherwise it may lead to edge collapse and premature wear;

◆ avoid adding too much pressure when the speed of the mill is reduced, which will overheat and blunt the rotary file;

◆ make the rotary file contact the workpiece as much as possible, so that more cutting edges can penetrate into the workpiece and the processing effect can be better;

◆ avoid the part of the tool handle contacting the workpiece, because this will overheat the rotary file and damage or even destroy the welding part;

◆ when it is necessary to keep the same position for continuous processing, or when processing materials with low thermal conductivity such as stainless steel and titanium alloy, the rotating speed should be appropriately reduced to avoid overheating of the tool;

◆ when processing high viscosity materials, lubricating oil or grease should be used to avoid the failure of the rotary file due to the blockage of the chip removal groove of the rotary file

Safety equipment must be provided when using rotary file

Wechat pictures_ twenty trillion and two hundred and eleven billion two hundred and thirty million one hundred and seventy thousand seven hundred and fifty-six png


Prev: Application of wizzard brand carbide rotary file    Next: 最后一篇
主站蜘蛛池模板: 色无极在线影院| 亚洲一区中文字幕在线| 婷婷激情亚洲| 亚洲小视频在线播放| 理论片国产| 日韩在线视频免费观看| 亚洲第一色图| 老色批网站| 婷婷色站| 国产主播在线看| 色播基地| 一级片在线免费观看| 欧美三级视频在线| 四虎影院视频在线观看| 操综合网| 欧美坐爱视频| 亚洲欧美日韩中文不卡| 黄色大片在线免费观看| 四虎影视国产在线观看精品| 影音先锋色天使| 日本不卡网| 亚洲精品福利视频| 男女爱爱视频免费看| 爽爽影院免费线看| 国产成都一二三四区| 日本三级网络| 亚洲人成在线精品| 欧美在线bdsm调教一区| 亚洲一区免费在线| 日本a黄色片| 资源站在线| 人人爽人人爱| 亚洲地址一地址二地址三| 明星三级国产免费播放| 亚洲福利天堂| 久久精品国产精品亚洲红杏| 婷婷在线成人免费观看搜索| 精品国产欧美一区二区最新| 香蕉中文在线| 久久天天躁狠狠躁夜夜爽蜜月| 丝袜啪啪|